PriceList for Fiber Laser Tube Cutting Machine - CE Series fiber laser cutting machine – Buluoer
PriceList for Fiber Laser Tube Cutting Machine - CE Series fiber laser cutting machine – Buluoer Detail:
☆ CE series parameters:
Model | CE3015 | CE4015 | CE6015 | CE4020 | CE6020 | CE4025 | CE6025 |
Effective cutting width(mm) | 1500 | 1500 | 1500 | 2000 | 2000 | 2500 | 2500 |
Effective cutting Length(mm) | 3000 | 4000 | 6000 | 4000 | 6000 | 4000 | 6000 |
Range of vertical stroke(mm) | 0-80 | ||||||
Input power | AC380V/50Hz;AC220V/50Hz | ||||||
Cutting thickness(mm) | Accroding to Laser power | ||||||
Cutting speed(mm/min) | 21000 (1000W/stainless δ1mm) | ||||||
Idle speed(mm/min) | 100000 | ||||||
Maximum Acceleration (G) | 1.2 | ||||||
Position repeat accuracy(mm) | ±0.05 | ||||||
Laser power(W) | (≤4000W)Accroding to the requriments | ||||||
Drive mode | Precision rack bilateral drive | ||||||
Laser wavelength(nm) | 1080 | ||||||
Cooling mode | Water-cooling | ||||||
Environmental temperature | 5-35℃ | ||||||
Cutting material | Carbon steel, stainless steel, alloy steel, copper, aluminum, galvanized sheet |
☆ CE3015 -Max/IPG1000W:
Fiber laser cutting machine uses fiber laser output
The laser beam with high energy density is focused on the surface of the workpiece, so that the area irradiated by the spot on the workpiece is partially melted and vaporized instantaneously, and the automatic cutting is realized by the computer controlled numerical control mechanical system moving the spot irradiation position. It is a high-tech equipment integrating laser technology, numerical control technology and precision mechanical technology.
Product detail pictures:
Related Product Guide:
We have been proud from the higher consumer gratification and wide acceptance due to our persistent pursuit of high quality both on product or service and service for PriceList for Fiber Laser Tube Cutting Machine - CE Series fiber laser cutting machine – Buluoer , The product will supply to all over the world, such as: Curacao, Slovenia, Hungary, We have got constantly insisted on the evolution of solutions, spent good funds and human resource in technological upgrading, and facilitate production improvement, meeting the wants of prospects from all countries and regions.
By Susan from Egypt - 2017.11.01 17:04
We are a small company that has just started, but we get the company leader's attention and gave us a lot of help. Hope we can make progress together!
By Kevin Ellyson from Argentina - 2018.03.03 13:09
Send your message to us:
Write your message here and send it to us